Technical drawing and digital representation

Technical Drawing

The teaching methodology is based on two learning processes: AFIRMATIVE METHOD, in practical classes, in which knowledge is transmitted using the display and demonstration materials inherent in each chapter. METHOD ACTIVE in laboratory practical classes, based on self training, where the student uses the analysis and testing of experimental models. In Classes Tutorials monitoring of students is done in the resolution, individually or in groups, practical exercises project design. ASSESSMENT: Students will be subject to summative evaluation on a scale of 0 to 20. Gets approval the student to reach the mark of 10 in the total of the two assessment components. The student achievement results from a continuous summative assessment with a weighting of 75% and is translated into practical work. The final, and individual written test of theoretical and practical nature, will contribute a weighting of 25% in the formation of the final grade.

GOALS:
To Know and apply concepts and methods of representation of technical drawing?
Reading and interpretation of projects?
Mastering Aided Design Computer 2D techniques using Autocad.
SKILLS:
Understanding a projet
Use of construction software?
Mastering the construction processes?
Knowing the procedures and the players in the construction sector?
Characterize materials and equipments.

TECHNICAL DRAWING |1. General aspects of technical drawing | 2. Orthogonal projection: Views Sections and sections | 3. Axonometric representation | 4. Quotation | 5. Specific aspects of the project design Technical organization of the project; Set drawings and compatibility in civil construction works; Interpretation of architectural design and specialties; Detail drawing | 6. Technical characterization of the project; Recognition of specific standards applicable to buildings; specialty projects
7. COMPUTER-ASSISTED DESIGN CONCEPTS AND TECHNIQUES | Introduction to CAD systems | Architecture of the Autocad program | Parameter definition | Data Entry | Editing Commands | Drawing Display Control | Editing Commands | Drawing by Layered by Layers | Textures and Patterning | Entities grouped in drawing blocks| Dimensioning (Drawing Dimensioning) | Printing (preparation of graphic pieces in digital and analog format)

• - Exercícios práticos de avaliação - 70.0%
• - Teste teórico-prático - 30.0%

NAO

CUNHA, Luís Veiga da (2010) – DESENHO TÉCNICO, (15º Edição) Fundação Calouste Gulbenkian, Lisboa, ISBN: 9789723110661

SILVA, Arlindo; DIAS, João; SOUSA, Luís (2004) – DESENHO TÉCNICO MODERNO, 12º Edição – LIDEL Editora, ISBN: 978-972-757-337-0

GARCIA, JOSÉ, (2015)- AutoCAD 2015 & AutoCAD LT 2015 – CURSO COMPLETO, 2ª Edição. FCA Editora

KATORI, ROSA (2020) – AutoCad 2019 – Projetos em 2D e Recursos Adicionais, Ed. Senac, S.Paulo

IPQ – NORMAS DE DESENHO TÉCNICO, (4ª edição) – NP-62, 1961; NP-89, 1963; NP-49, 1968; NP-327, 1964; NP-671, 1973; NP-297, 1963; NP-328, 1964; NP-167, 1966; NP-716, 1968; NP-204, 1968; NP-718, 1968;

PERIS, Vicente Giménez (2014) – DIÉDRICO DIRECTO-Tomo II, Mares de Libros, ISBN: 978-84-616-8764-0

PORTO, Editora – REGULAMENTO GERAL EDIFICAÇÕES URBANAS, Porto ISBN: 978-972-0-00036-1

SILVA, João Fernandes, (2022) CADERNO 01 – Apontamentos de Desenho Técnico, ISEC

SILVA, João Fernandes, (2022) CADERNO 03 – Introdução ao Desenho Assistido por Computador, ISEC

TELES, Paula; PEREIRA, Carlos; SILVA, Pedro R. (2007) GUIA DE ACESSIBILIDADE E MOBILIDADE PARA TODOS, Apontamentos para melhor interpretação do Decreto-Lei 163/2006 de 08 de Agosto; ISBN: 978-989-8051-04-2

BROWN, G. Z. & Dekay, M.,(2004) Sol, vento e luz. Estratégias para o projeto de arquitetura, Bookman Edition

GONÇALVES, H. et al. (1997) Edifícios Solares Passivos em Portugal, INETI

SANTOS, António – A iluminação Natural. In Ambiente em Edifícios Urbanos. Lisboa: LNEC, 2000. ISBN 9724918513

SOLANAS, Toni – VIVENDA Y SOSTENIBILIDADE, Vol. 01: Unifamiliar, Ed. Gustavo Gili, Barcelona

SOLANAS, Toni – VIVENDA Y SOSTENIBILIDADE, Vol. 02: Colectiva, Ed. Gustavo Gili, Barcelona

TIRONE, Lívia , N. – Construção sustentável: soluções eficientes hoje, a nossa riqueza amanhã. 2ª ed. Sintra: Tirone Nunes S. A., 2008. ISNB 9789892011912.

WINES, James – Green Architecture. Koln: Taschen, 2000. ISBN 3822863033

YANNAS, Simos – Solar Energy anda Housing Design, London: Architectural Association, 1994, Vol I. ISBN 1870890361

YANNAS, Simos – Solar Energy anda Housing Design, London: Architectural Association, 1994, Vol II. ISBN 187089037X.

YEANG, Ken – Projectar com la naturaleza: bases ecológicas para el proyecto arquitectónico. Barcelona: G Gili, 1999. ISBN8425217636

Application software: Autocad Release 2023, by Autodesk